Speaker
Indicator LEDs
Switches
Power Supply
Debug / Setup - EC / KBC
External ROM
DC-IN (Optional)
PHYSICAL
Dimensions
Weight
I/O INTERFACES
Parallel
Serial
IrDA
HDD (IDE)
FDD
CRT
LCD - Data / Control
Power
USB
Keyboard
Mouse
CardBus
|
Piezo-electric Buzzer
Two Numeric Block LEDs (for debug use)
HDD Access LED
Power Mode LED x 3
Main Switch (Slide Type)
Suspend / Resume Switch (Push Button Type)
Lid Switch (Push Button Type)
Low Battery Switch (Push Button Type)
RI Switch (Push Button Type)
Reset Switch (Push Button Type)
ATX Power Supply Connector
Backup Battery (CR2450)
These connectors are not normally used
(Used for debugging and pre-shipment adjustment only)
110V/220V ATX power supply
182.8mm x 203.2mm x 25.4mm (7.2” x 8” x 1”)
≤ 300g (10.5 oz)
D-SUB25 Connector (supports SPP / EPP / ECP modes)
D-SUB9 Connector (COM2 / IrDA share a single interface) x 2
IrDA1.1 (IrDA / COM2 share a single interface)
2.5" (2mm pitch 50-pin header)
3.5" (40-pin header)
ATA (PCMCIA card type)
34-pin header
1mm pitch 26-pin FFC / FPC (both 720KB / 1.44MB, 2-mode)
D-SUB15 Connector
50-pin header (TFT Color, STN Color)
10-pin Plug (2.5mm pitch)
USB Connector x 2
PS/2-Compatible 6-pin MINI-DIN
PS/2-Compatible 6-pin MINI-DIN
2 x Type II / 1 x Type III
(PCMCIA 2.1 / JEIDA 4.2 Compatible)
(32-bit CardBus PC Card / 16-bit PC Card)
(Controller: RICOH RL5C476/R5C476II) |
